[Open-graphics] Howard's comment on the General Purpose I/O Connector

[James Richard Tyrer]

Timothy Normand Miller wrote:
> Howard said:
> 
> Its a 3M part no. P50E-100P1-SR1-EA.
> $5 to $10 from Newark Electronics depending
> on quantity.
> 
> The dual row pin strip mentioned in the forwarded
> e-mail wont work because of the staggered pin layout.
> Single row strip (up to 25 pins) works but you cant
> get them to fit in adjacent rows, so you can only
> connect to 50 of the I/O.

IIUC, the PCB is not designed to use a standard berg (0.1" x 0.1") 2 x 
50 header but rather a 4 x 25 bin staggered pin connection.

What is the pin spacing?

-- 
JRT