[Open-graphics] JTAG cables

[Simon]

http://www.ixo.de/info/usb_jtag/

Also, http://www.nslu2-linux.org/wiki/HowTo/RecoverFromABadFlashUsingJTAG
refers to a parallel cable from Digilent, but that ppage also has a
USB JTAG cable for $38:
http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-USB&Nav1=Products&Nav2=Cables

Is it possible (or necessary) to write a driver for that cable to
program Xilinx chips?

On 2/7/07, Koen De Vleeschauwer <koenraad.devleeschauwer at lid.kviv.be> wrote:
> The Xilinx Platform cable USB (Xilinx partno: HW-USB-G) costs 149$ from
> Avnet (, 149 Euro from Trenz Elektronik ( http://shop.trenz-electronic.de/
> ). Works with ISE release 6.3.03i and higher.
>
> regards,
>
> koen
>
>
> > The only referneces i found there was either to Wiggler type
> > cables (using the parallel port) or to BDI2000 (which is a
> > full fledged debugger and costs >2000EUR).
> >
> _______________________________________________
> Open-graphics mailing list
> Open-graphics at duskglow.com
> http://lists.duskglow.com/mailman/listinfo/open-graphics
> List service provided by Duskglow Consulting, LLC (www.duskglow.com)
>