[Open-graphics] PCIe know-how?

[Daniel Rozsnyó]

OGP does not do PCIe (yet). Only PCI and PCI-X.

Anyway, for your instrument I would suggest interfacing it to USB2 if 
you can offload the processing to dsp/fpga, but that won't be under 
$100. For such a price you can get an ADC and a PCIe interface, but then 
you will have troubles with processing the 500+ MB/s of data in realtime 
on the PC's CPU..

Daniel


ceriel at gmail.com wrote:
> Hello,
> 
> I'm trying to create a low-cost (below $100€) Software Defined
> Radio/Spectrum Analyser/Oscilloscope using a high-speed AD converter,
> an FPGA, and the PCIe bus. It would be Open Hardware and compatible
> with the efforts of the GNU Radio group.
> 
> I don't have a lot of experience with this sort of thing, but by using
> existing Open Source solutions I think it should be possible. Since
> your project deals with both FPGAs and the PCIe  bus I was wondering
> what existing efforts of yours', or existing know-how, I could use for
> my own project? Do you have any solutions in mind I could re-purpose
> or benefit from?
> 
> Sincerely,
> -- 
> Nos
> _______________________________________________
> Open-graphics mailing list
> Open-graphics at duskglow.com
> http://lists.duskglow.com/mailman/listinfo/open-graphics
> List service provided by Duskglow Consulting, LLC (www.duskglow.com)