[Open-graphics] [urgent] Last minute opportunity for OGD1, perhaps video in?

[howard parkin]

> > Finally, I think it would be awesome to have a 60 or 92 or 120 pin Gumstix interface:
> > www.gumstix.com. The 60 is probably easiest for you guys to achieve, given you only
> > have 60 IO, but the 92 is faster and you don't need to have all the signals connected.
> > These are really small molex connectors that you might be able to fit. The obvious
> > advantage of this is that it would be the _only_ 3D accelerator for the Gumstix and also
> > that it would allow the gumstix+ODG system to be operated without a computer in a
> > custom case.
>

Actually, the 92-way connector is really low-profile (2mm) and
could be accommodated on the back of a PCI board (2.67mm allowed).

The problem is that most of the gumstix expansion boards
are designed to mechanically integrate with the tiny gumstix
motherboards and the connectors on them would clash with the back
of our board.

Still, the 92 way connector is nice, even if we can't
fully populate it with signals.