[Open-graphics] OGA block diagram?
lucmars2 at orange.fr
Thu Nov 15 14:36:17 EST 2007
Le jeudi 15 novembre 2007 à 12:06 -0600, Terry Hancock a écrit :
> luc marschall wrote:
> > Is there a way to extract the schematics data in a spreadsheet?
> > I'm more used with schematics for wiring harness, but these drawings
> > always contain a table of the connections from a connector to some
> > others with pin numbers, wire numbers and theirs splices.
> That's called a "netlist". There's a link on the OGD1 "Components" page:
> Verilog and EDIF netlists for the OGD1 board can be found here
Nice but hard, though, interesting to decode.
> I'm uncertain what revision it's from, though. I'm also not positive
> whether this is a netlist for the PCB or the OGA or both. There are two
> files inside, called "OGD1.edf" and "OGD1.v".
OGD1.v still mention:
XP6 256 fpBGA
so, that seems to be out-of-date
> The documentation on the wiki is still very disorganized. I'm currently
> working on artwork and tables for the components, but I think we'll
> probably want to give some thought to "information architecture" for the
> documentation. :-)
> Then hopefully the answers to some of these questions will become easier
> to find! (Quite a bit is already there now if you're willing to dig for it).
More information about the Open-graphics